No products in the cart.
To power on 2 smoke alarms remove the battery insulating films from their battery compartments. Note: Make sure that only 2 smoke alarms are powered on at a time to ensure successful interconnection. 2. Press the test/silence button on one of the 2 smoke alarms 4 times and this alarm will beep once and the red LED will flash continuously indicating it has entered the interconnecting mode. After successfully creating an interlinked network this alarm will beep once and automatically exit the interconnecting mode. To ensure that all smoke alarms enter the same interlinked network make sure only one smoke alarm enters interconnecting mode at a time. 3. If you want to interconnect a third smoke alarm power it on and press the test/silence button 4 times to interconnect to the previously interconnected smoke alarms. Up to 24 smoke alarms can be interconnected this way. 4. Test the smoke alarms according to the steps in the section Alarm Test. How to Disconnect Press the test/silence button 4 times and the smoke alarm will beep once then hold down the button until it beeps once to disconnect. After disconnecting you can connect it again to let it enter the interlinked network. How to Quickly Find the Source Alarm Press the test/silence button on any interconnected alarm. If all alarms are muted the smoke alarm you pressed is the source alarm. If one smoke alarm is still sounding that alarm is the source alarm. This allows you to easily locate the source alarm. Package Contents 1 Alarm Unit 1 Mounting Bracket 2 Screws 2 Anchor Plugs 1 User Manual