And please give us the information about your motor purpose to recommend a suitable DPS to you. Also please note the below points carefully. 1. 3.7KW 15 amps 2. It should only be used for one motor per one DPS. The use of multiple motors is not allowed in our DPS. 3. The input/output voltage of our DPS is 200v240v. 4. Our DPS is designed to be suitable for use in an electric motor. 5. The efficiency is around 9095% for using an electric motor. 6. The voltage of the motor should be 200v240v. If the voltage of your motor is 380v or 440v you should change the wire of the motor to 200v240v purpose to connect with the output of our DPS. 7. The thickness of wires should be suitable for amperes. 8. Only a single-phase motor brake is allowed. Three-phase motor brake is not working at our DPS 9. You could check three-phase on the output of DPS when your motor is running. If your motor is not running you could not check the three-phase from the output of DPS. 10. If your motor has a magnetic starter or electronic switch or brake the operating wires of this device should be connected on U and W of the output of our phase converter. Thus if your motor is not running well or the motor is reversing you should turn off the power immediately and you have to switch the wires on outputU V W of our phase converter. Actually when you connect the wires from the output of the phase converter to your motor you could succeed the first time or second time or third time.
Phase Converter Should Be Only used for Motor of 15 Amps and 5HP 3.7kW Input: 1PH 200V-240V Output: 3PH 200V-240V Only One Motor Should Be used
$72.83